Description
A made to order Bimetal bandsaw blade
Material: Bimetal
Length: 2310
Width: 19
TPI: 10/14
Not quite right?
Order a custom size Bandsaw Blade
About this 2310mm x 19mm 10/14 TPI bimetal blade
If your machine takes a 2310mm blade and you cut mostly metal, this 19mm bimetal blade with 10/14 TPI is a dependable choice. Its teeth are variable pitch, between 10 and 14 teeth per inch, so it cuts smoothly across a range of section sizes.
What 10/14 TPI suits
At 10/14 TPI this 2310mm blade is best suited to smaller solids, tube, angle and general fabrication stock. Keep at least three teeth in the cut at all times: as a rule of thumb that means sections from about 6-8mm upwards. It is not the right choice for large solid bar, where the fine teeth would fill their gullets and cut slowly. Our metals TPI chart gives more detail.
Width and length
A 19mm width gives a good balance of beam strength and flexibility - stiff enough to hold a straight, square cut through metal stock, a common width on workshop metal-cutting bandsaws. As for length, that length points to a small-to-medium workshop bandsaw. A bandsaw blade must match the machine's required length exactly, so check your manual or the old blade before ordering this 2310mm size.
Bimetal construction gives this 19mm blade a hardened high-speed steel cutting edge joined to a flexible steel back. It keeps cutting where a plain carbon blade would dull quickly, which makes the 2310mm x 19mm 10/14 TPI a sound choice for regular metalwork in a workshop or fabrication shop.
How to check this is the right blade
Measure the full loop length of your current blade (or check the machine plate or manual) and confirm it is 2310mm. Measure the width from the tooth tips to the back edge - it should be 19mm - and count the teeth over one inch to confirm the 10/14 pitch. Our guides how are bandsaw blades measured and which TPI do I need walk through each step.
Frequently asked questions
Does a new 2310mm bimetal blade need breaking in?
Yes. Running the first cuts at reduced feed helps hone the HSS tooth tips and extends blade life. See how bandsaw break-in is done.
Which machines take a 2310mm blade?
We do not list machine models, as blade lengths vary between versions. Check your machine manual or measure the old blade - if it is 2310mm and the width suits your guides, this blade will fit.
Can I cut wood with this 2310mm x 19mm 10/14 TPI bimetal blade?
It will cut wood, but at 10/14 TPI it is designed around metal, and a bimetal blade is a costlier way to cut timber. For wood-only work a carbon blade in the same 2310mm length is usually the better buy.
Need a different size? order your bandsaw blade online.





Reviews
There are no reviews yet.