Bimetal Bandsaw Blade (L) 5145mm (W) 19mm x 6/10TPI

£41.66

Order this exact blade

Description

A made to order Bimetal bandsaw blade

Material: Bimetal

Length: 5145

Width: 19

TPI: 6/10


Not quite right?
Order a custom size Bandsaw Blade

About this 5145mm x 19mm 6/10 TPI bimetal blade

Made to order in the UK, this bimetal blade measures 5145mm in length and 19mm in width, with 6/10 teeth per inch. Its tooth pattern is variable pitch, moving between 6 and 10 teeth per inch, so it cuts smoothly across a range of section sizes.

What 6/10 TPI suits

The 6/10 pitch on this 19mm blade is aimed at medium solid bar, angle, channel and tube with a reasonable wall thickness. Follow the three-teeth rule - at least three teeth in contact with the work - which puts the practical lower limit at about 10-12mm of material thickness. Avoid using it on thin sheet, where a finer pitch is needed; the metals TPI chart shows the alternatives.

Width and length

The 5145mm length matters first: a loop this long is used on larger workshop and production bandsaws, and the blade has to match the length your machine specifies exactly. The 19mm width then gives a good balance of beam strength and flexibility - stiff enough to hold a straight, square cut through metal stock, a common width on workshop metal-cutting bandsaws.

As a bimetal blade, the 5145mm x 19mm 6/10 TPI has high-speed steel (HSS) teeth welded to a flexible alloy steel back. The hard HSS edge holds its sharpness when cutting steel, stainless and other metals, while the tough back resists fatigue as it flexes around the wheels. That combination is why bimetal blades are the usual choice for metal cutting.

How to check this is the right blade

Three checks confirm the fit: the length must be exactly 5145mm, the width 19mm from tooth tip to back edge, and 6/10 teeth per inch for the work you do. See how are bandsaw blades measured for measuring an old blade, and which TPI do I need if you are unsure about the pitch.

Frequently asked questions

What if I need 5145mm in a different TPI or width?

Every blade is made to order, so you can choose another width or TPI at the same 5145mm length on our custom order page.

Does a new 5145mm bimetal blade need breaking in?

Yes. Running the first cuts at reduced feed helps hone the HSS tooth tips and extends blade life. See how bandsaw break-in is done.

Which machines take a 5145mm blade?

We do not list machine models, as blade lengths vary between versions. Check your machine manual or measure the old blade - if it is 5145mm and the width suits your guides, this blade will fit.

Need a different size? order your bandsaw blade online.

Additional information

Material

Bimetal

Size

Width

19mm

TPI

6/10

Reviews

There are no reviews yet.

Be the first to review “Bimetal Bandsaw Blade (L) 5145mm (W) 19mm x 6/10TPI”

Your email address will not be published. Required fields are marked *