Description
Bimetal bandsaw blade
Material: Bimetal
Length:3990
Width: 27
TPI: 3/4
Not quite right?
Order a custom size bandsaw blade
About this 3990mm x 27mm 3/4 TPI bimetal blade
This is a 3990mm long, 27mm wide bimetal bandsaw blade with a 3/4 TPI tooth pattern, made to order for metal cutting. The teeth are variable pitch, alternating between 3 and 4 teeth per inch, which helps reduce vibration and noise and lets one blade handle a spread of section sizes.
What 3/4 TPI suits
At 3/4 TPI this 3990mm blade is best suited to large solid bar, thick-walled tube and heavy sections, as well as thick timber. Keep at least three teeth in the cut at all times: as a rule of thumb that means sections from about 25mm upwards. It is not the right choice for thin sheet or thin-wall tube, where too few teeth would be in the cut and could snag or strip. Our metals TPI chart gives more detail.
Width and length
A 27mm width gives a wide, rigid band built for straight, square cuts through larger stock - it is not intended for curves, and your machine guides and tensioner must be set up for this width. As for length, that length is typical of a medium-sized workshop or fabrication bandsaw. A bandsaw blade must match the machine's required length exactly, so check your manual or the old blade before ordering this 3990mm size.
As a bimetal blade, the 3990mm x 27mm 3/4 TPI has high-speed steel (HSS) teeth welded to a flexible alloy steel back. The hard HSS edge holds its sharpness when cutting steel, stainless and other metals, while the tough back resists fatigue as it flexes around the wheels. That combination is why bimetal blades are the usual choice for metal cutting.
How to check this is the right blade
Measure the full loop length of your current blade (or check the machine plate or manual) and confirm it is 3990mm. Measure the width from the tooth tips to the back edge - it should be 27mm - and count the teeth over one inch to confirm the 3/4 pitch. Our guides how are bandsaw blades measured and which TPI do I need walk through each step.
Frequently asked questions
Can I cut timber with this 3990mm x 27mm 3/4 TPI bimetal blade?
Yes. A coarse 3/4 TPI bimetal blade is a popular choice for thick timber and for reclaimed wood that may hide nails or screws, such as pallets, because the HSS teeth cope with the odd nail far better than a carbon blade. For clean, nail-free timber only, a carbon blade is the cheaper option.
What if I need 3990mm in a different TPI or width?
Every blade is made to order, so you can choose another width or TPI at the same 3990mm length on our custom order page.
Does a new 3990mm bimetal blade need breaking in?
Yes. Running the first cuts at reduced feed helps hone the HSS tooth tips and extends blade life. See how bandsaw break-in is done.
Need a different size? order your bandsaw blade online.





Reviews
There are no reviews yet.