Bimetal Bandsaw Blade (L) 4015mm (W) 19mm x 3/4TPI

£33.32

Order this exact blade

Description

Bimetal bandsaw blade

Material: Bimetal
Length: 4015
Width: 19
TPI: 3/4


Not quite right?
Order a custom size Bandsaw Blade

About this 4015mm x 19mm 3/4 TPI bimetal blade

Made to order in the UK, this bimetal blade measures 4015mm in length and 19mm in width, with 3/4 teeth per inch. Its tooth pattern is variable pitch, alternating between 3 and 4 teeth per inch, so it cuts smoothly across a range of section sizes.

What 3/4 TPI suits

The 3/4 pitch on this 19mm blade is aimed at large solid bar, thick-walled tube and heavy sections, as well as thick timber. Follow the three-teeth rule - at least three teeth in contact with the work - which puts the practical lower limit at about 25mm of material thickness. Avoid using it on thin sheet or thin-wall tube, where too few teeth would be in the cut and could snag or strip; the metals TPI chart shows the alternatives.

Width and length

The 4015mm length matters first: that length is typical of a medium-sized workshop or fabrication bandsaw, and the blade has to match the length your machine specifies exactly. The 19mm width then gives a good balance of beam strength and flexibility - stiff enough to hold a straight, square cut through metal stock, a common width on workshop metal-cutting bandsaws.

Bimetal construction gives this 19mm blade a hardened high-speed steel cutting edge joined to a flexible steel back. It keeps cutting where a plain carbon blade would dull quickly, which makes the 4015mm x 19mm 3/4 TPI a sound choice for regular metalwork in a workshop or fabrication shop.

How to check this is the right blade

Three checks confirm the fit: the length must be exactly 4015mm, the width 19mm from tooth tip to back edge, and 3/4 teeth per inch for the work you do. See how are bandsaw blades measured for measuring an old blade, and which TPI do I need if you are unsure about the pitch.

Frequently asked questions

What if I need 4015mm in a different TPI or width?

Every blade is made to order, so you can choose another width or TPI at the same 4015mm length on our custom order page.

Does a new 4015mm bimetal blade need breaking in?

Yes. Running the first cuts at reduced feed helps hone the HSS tooth tips and extends blade life. See how bandsaw break-in is done.

Which machines take a 4015mm blade?

We do not list machine models, as blade lengths vary between versions. Check your machine manual or measure the old blade - if it is 4015mm and the width suits your guides, this blade will fit.

Need a different size? order your bandsaw blade online.

Additional information

Material

Bimetal

Size

Width

19mm

TPI

3/4

Reviews

There are no reviews yet.

Be the first to review “Bimetal Bandsaw Blade (L) 4015mm (W) 19mm x 3/4TPI”

Your email address will not be published. Required fields are marked *