Reciprocating blades 5 Pack (L) 229mm – (W) 25mm – Thickness 1.3mm – 14TPI Metal

Description

What this blade is for

These Morse reciprocating saw blades come in a 5 pack and measure 229mm (9″) long, 25mm (1″) wide and 1.3mm thick, with 14 teeth per inch. They are listed for cutting metal.

14 TPI is a medium pitch for metal, with teeth roughly 1.8mm apart. It suits medium-thickness sections such as pipe, angle iron, channel, threaded rod and bar, where a coarser blade would snag and a finer one would clog. As a rule, aim to keep at least three teeth in contact with the metal.

The 25mm width and 1.3mm thickness make this one of the stiffer options. A wider, thicker blade resists bending and wandering, which helps when cutting steel for long periods or when you need a straight line. The 229mm length gives reach through larger sections and pipework.

For best blade life, use a slower stroke speed on metal, let the blade do the work and keep the saw's shoe pressed firmly against the material to reduce vibration.

How to check this is the right blade

Lay your old blade on a rule and check it is 229mm from tip to shank end, 25mm across its widest point and 1.3mm thick (a caliper is easiest). Then count the teeth across one inch: you should find 14 teeth. The 25mm width is easy to confuse with 20mm, so measure carefully. Our how blades are measured and which TPI do I need guides explain the principles.

Frequently asked questions

What is the advantage of a 25mm wide blade?

The extra width makes the blade stiffer than a 20mm one, so it is less likely to bend or drift in the cut. That helps with straight cuts and heavier metal work.

Is 14 TPI right for thin sheet metal?

For very thin material, a finer pitch such as 18 TPI keeps more teeth in the cut and gives a smoother result. 14 TPI is better on medium sections like pipe and angle.