Bimetal Bandsaw Blade (L) 6695mm (W) 27mm x 3/4TPI

£54.27

Order this exact blade

Description

A made to order Bimetal bandsaw blade

Material: Bimetal

Length: 6695mm

Width: 27mm

TPI: 3/4


Not quite right?
Order a custom size bandsaw blade

About this 6695mm x 27mm 3/4 TPI bimetal blade

Our 6695mm x 27mm 3/4 TPI bimetal bandsaw blade is built for cutting steel and other metals. Each one is made to order to the exact 6695mm length, with teeth that are variable pitch, alternating between 3 and 4 teeth per inch.

What 3/4 TPI suits

The 3/4 pitch on this 27mm blade is aimed at large solid bar, thick-walled tube and heavy sections, as well as thick timber. Follow the three-teeth rule - at least three teeth in contact with the work - which puts the practical lower limit at about 25mm of material thickness. Avoid using it on thin sheet or thin-wall tube, where too few teeth would be in the cut and could snag or strip; the metals TPI chart shows the alternatives.

Width and length

The 6695mm length matters first: a loop this long is used on larger workshop and production bandsaws, and the blade has to match the length your machine specifies exactly. The 27mm width then gives a wide, rigid band built for straight, square cuts through larger stock - it is not intended for curves, and your machine guides and tensioner must be set up for this width.

Bimetal construction gives this 27mm blade a hardened high-speed steel cutting edge joined to a flexible steel back. It keeps cutting where a plain carbon blade would dull quickly, which makes the 6695mm x 27mm 3/4 TPI a sound choice for regular metalwork in a workshop or fabrication shop.

How to check this is the right blade

Three checks confirm the fit: the length must be exactly 6695mm, the width 27mm from tooth tip to back edge, and 3/4 teeth per inch for the work you do. See how are bandsaw blades measured for measuring an old blade, and which TPI do I need if you are unsure about the pitch.

Frequently asked questions

Which machines take a 6695mm blade?

We do not list machine models, as blade lengths vary between versions. Check your machine manual or measure the old blade - if it is 6695mm and the width suits your guides, this blade will fit.

Can I cut timber with this 6695mm x 27mm 3/4 TPI bimetal blade?

Yes. A coarse 3/4 TPI bimetal blade is a popular choice for thick timber and for reclaimed wood that may hide nails or screws, such as pallets, because the HSS teeth cope with the odd nail far better than a carbon blade. For clean, nail-free timber only, a carbon blade is the cheaper option.

What if I need 6695mm in a different TPI or width?

Every blade is made to order, so you can choose another width or TPI at the same 6695mm length on our custom order page.

Need a different size? order your bandsaw blade online.

Additional information

Material

Bimetal

Size

Width

27mm

TPI

3/4

Reviews

There are no reviews yet.

Be the first to review “Bimetal Bandsaw Blade (L) 6695mm (W) 27mm x 3/4TPI”

Your email address will not be published. Required fields are marked *