Description
A made to order Bimetal bandsaw blade
Material: Bimetal
Length: 1155 mm
Width: 12.7 mm
TPI: 10/14 TPI
Not quite right?
Order a custom size Bandsaw Blade
Bimetal bandsaw blades represent a significant advancement in cutting technology, offering unparalleled performance and durability compared to traditional carbon blades. Constructed from two distinct materials that are expertly welded together, bimetal blades revolutionise cutting applications across various industries.
About this 1155mm x 12.7mm 10/14 TPI bimetal blade
This is a 1155mm long, 12.7mm wide bimetal bandsaw blade with a 10/14 TPI tooth pattern, made to order for metal cutting. The teeth are variable pitch, between 10 and 14 teeth per inch, which helps reduce vibration and noise and lets one blade handle a spread of section sizes.
What 10/14 TPI suits
At 10/14 TPI this 1155mm blade is best suited to smaller solids, tube, angle and general fabrication stock. Keep at least three teeth in the cut at all times: as a rule of thumb that means sections from about 6-8mm upwards. It is not the right choice for large solid bar, where the fine teeth would fill their gullets and cut slowly. Our metals TPI chart gives more detail.
Width and length
A 12.7mm width gives a narrower, more flexible band that suits straight cuts and gentle curves on smaller machines, and runs comfortably on smaller wheels. As for length, a short loop like this belongs to a compact machine, such as a small portable or bench-mounted saw. A bandsaw blade must match the machine's required length exactly, so check your manual or the old blade before ordering this 1155mm size.
The HSS tooth edge on this 1155mm bimetal blade stays sharp under the heat of metal cutting, and the spring-steel back flexes around the wheels without cracking early. For mild steel, stainless, tool steels and non-ferrous metals that makes bimetal the longer-lasting option; for wood-only work a carbon blade is a cheaper alternative.
How to check this is the right blade
Measure the full loop length of your current blade (or check the machine plate or manual) and confirm it is 1155mm. Measure the width from the tooth tips to the back edge - it should be 12.7mm - and count the teeth over one inch to confirm the 10/14 pitch. Our guides how are bandsaw blades measured and which TPI do I need walk through each step.
Frequently asked questions
Can I cut wood with this 1155mm x 12.7mm 10/14 TPI bimetal blade?
It will cut wood, but at 10/14 TPI it is designed around metal, and a bimetal blade is a costlier way to cut timber. For wood-only work a carbon blade in the same 1155mm length is usually the better buy.
What if I need 1155mm in a different TPI or width?
Every blade is made to order, so you can choose another width or TPI at the same 1155mm length on our custom order page.
Does a new 1155mm bimetal blade need breaking in?
Yes. Running the first cuts at reduced feed helps hone the HSS tooth tips and extends blade life. See how bandsaw break-in is done.
Need a different size? order your bandsaw blade online.





Reviews
There are no reviews yet.