Bimetal Bandsaw Blade (L) 1507mm (W) 12.7mm x 10/14TPI

£16.69

Order this exact blade

Description

A made to order Bimetal bandsaw blade

Material: Bimetal

Length: 1507 mm

Width: 12.7 mm

TPI: 10/14 TPI


Not quite right?
Order a custom size Bandsaw Blade

About this 1507mm x 12.7mm 10/14 TPI bimetal blade

This is a 1507mm long, 12.7mm wide bimetal bandsaw blade with a 10/14 TPI tooth pattern, made to order for metal cutting. The teeth are variable pitch, between 10 and 14 teeth per inch, which helps reduce vibration and noise and lets one blade handle a spread of section sizes.

What 10/14 TPI suits

At 10/14 TPI this 1507mm blade is best suited to smaller solids, tube, angle and general fabrication stock. Keep at least three teeth in the cut at all times: as a rule of thumb that means sections from about 6-8mm upwards. It is not the right choice for large solid bar, where the fine teeth would fill their gullets and cut slowly. Our metals TPI chart gives more detail.

Width and length

A 12.7mm width gives a narrower, more flexible band that suits straight cuts and gentle curves on smaller machines, and runs comfortably on smaller wheels. As for length, that length points to a small-to-medium workshop bandsaw. A bandsaw blade must match the machine's required length exactly, so check your manual or the old blade before ordering this 1507mm size.

As a bimetal blade, the 1507mm x 12.7mm 10/14 TPI has high-speed steel (HSS) teeth welded to a flexible alloy steel back. The hard HSS edge holds its sharpness when cutting steel, stainless and other metals, while the tough back resists fatigue as it flexes around the wheels. That combination is why bimetal blades are the usual choice for metal cutting.

How to check this is the right blade

Measure the full loop length of your current blade (or check the machine plate or manual) and confirm it is 1507mm. Measure the width from the tooth tips to the back edge - it should be 12.7mm - and count the teeth over one inch to confirm the 10/14 pitch. Our guides how are bandsaw blades measured and which TPI do I need walk through each step.

Frequently asked questions

Can I cut wood with this 1507mm x 12.7mm 10/14 TPI bimetal blade?

It will cut wood, but at 10/14 TPI it is designed around metal, and a bimetal blade is a costlier way to cut timber. For wood-only work a carbon blade in the same 1507mm length is usually the better buy.

What if I need 1507mm in a different TPI or width?

Every blade is made to order, so you can choose another width or TPI at the same 1507mm length on our custom order page.

Does a new 1507mm bimetal blade need breaking in?

Yes. Running the first cuts at reduced feed helps hone the HSS tooth tips and extends blade life. See how bandsaw break-in is done.

Need a different size? order your bandsaw blade online.

Additional information

Material

Bimetal

Size

Width

12.7mm

TPI

10/14

Reviews

There are no reviews yet.

Be the first to review “Bimetal Bandsaw Blade (L) 1507mm (W) 12.7mm x 10/14TPI”

Your email address will not be published. Required fields are marked *