Description
A made to order Bimetal bandsaw blade
Material: Bimetal
Length: 4595
Width: 19
TPI: 6/10
Not quite right?
Order a custom size bandsaw blade
Bimetal bandsaw blades signify a substantial advancement in cutting technology, offering unmatched performance and durability compared to traditional carbon blades. Constructed from two different materials that are seamlessly welded together, a bimetal blade enhances cutting operations across various sectors.
About this 4595mm x 19mm 6/10 TPI bimetal blade
This is a 4595mm long, 19mm wide bimetal bandsaw blade with a 6/10 TPI tooth pattern, made to order for metal cutting. The teeth are variable pitch, moving between 6 and 10 teeth per inch, which helps reduce vibration and noise and lets one blade handle a spread of section sizes.
What 6/10 TPI suits
At 6/10 TPI this 4595mm blade is best suited to medium solid bar, angle, channel and tube with a reasonable wall thickness. Keep at least three teeth in the cut at all times: as a rule of thumb that means sections from about 10-12mm upwards. It is not the right choice for thin sheet, where a finer pitch is needed. Our metals TPI chart gives more detail.
Width and length
A 19mm width gives a good balance of beam strength and flexibility - stiff enough to hold a straight, square cut through metal stock, a common width on workshop metal-cutting bandsaws. As for length, that length is typical of a medium-sized workshop or fabrication bandsaw. A bandsaw blade must match the machine's required length exactly, so check your manual or the old blade before ordering this 4595mm size.
Bimetal construction gives this 19mm blade a hardened high-speed steel cutting edge joined to a flexible steel back. It keeps cutting where a plain carbon blade would dull quickly, which makes the 4595mm x 19mm 6/10 TPI a sound choice for regular metalwork in a workshop or fabrication shop.
How to check this is the right blade
Measure the full loop length of your current blade (or check the machine plate or manual) and confirm it is 4595mm. Measure the width from the tooth tips to the back edge - it should be 19mm - and count the teeth over one inch to confirm the 6/10 pitch. Our guides how are bandsaw blades measured and which TPI do I need walk through each step.
Frequently asked questions
Can I cut wood with this 4595mm x 19mm 6/10 TPI bimetal blade?
It will cut wood, but at 6/10 TPI it is designed around metal, and a bimetal blade is a costlier way to cut timber. For wood-only work a carbon blade in the same 4595mm length is usually the better buy.
What if I need 4595mm in a different TPI or width?
Every blade is made to order, so you can choose another width or TPI at the same 4595mm length on our custom order page.
Does a new 4595mm bimetal blade need breaking in?
Yes. Running the first cuts at reduced feed helps hone the HSS tooth tips and extends blade life. See how bandsaw break-in is done.
Need a different size? order your bandsaw blade online.





Reviews
There are no reviews yet.