Description
Bimetal bandsaw blades made to order
Material: Bimetal
Length: 1790 mm
Width: 12.7 mm
TPI: 4
Require a custom size? order your bandsaw blade online.
About this 1790mm x 12.7mm 4 TPI bimetal blade
This 1790mm x 12.7mm (1/2″) x 4 TPI bimetal bandsaw blade is set up for quick, heavy cutting in wood and other softer materials.
Four teeth per inch spaces the teeth over 6mm apart, so the deep gullets clear sawdust well in thick stock. It works best in timber about 19mm thick and above - ripping boards, resawing and breaking down larger pieces - and it will cut plastics too. On thin sheet it would snag, so choose a finer pitch there.
The 1/2″ width gives the band stiffness to hold a straight line in deep cuts, which is why it suits resawing and ripping. It will take gentle curves but is not intended for tight radius work.
Being bimetal, the blade has hardened high-speed steel teeth on a flexible spring-steel back. The teeth hold their edge longer than a plain carbon blade, which helps in dense hardwoods. The 1790mm length is typically used on smaller bandsaws, so confirm the size against your machine.
How to check this is the right blade
Check that your machine’s plate, manual or old blade says 1790mm, measure the band at 12.7mm (1/2″) across from tooth tip to back edge, and count 4 teeth in one inch. Our guides to how bandsaw blades are measured and which TPI you need walk you through it.
Is 4 TPI good for resawing?
Yes. A coarse pitch on a wide band is the classic resawing set-up, as the large gullets carry sawdust out of a deep cut. See our resawing guide.
Why choose bimetal for wood cutting?
The HSS teeth stay sharp for longer, which is useful in hardwoods and for regular use. Read more in wood cutting with bimetal bandsaw blades.
Need a different size? Order your bandsaw blade online made to your exact length, width and TPI.





Reviews
There are no reviews yet.