Description
Bimetal bandsaw blade
Material: Bimetal
Length: 4475mm
Width: 27mm
TPI: 10/14
Not quite right?
Order a custom size Bandsaw Blade
About this 4475mm x 27mm 10/14 TPI bimetal blade
Our 4475mm x 27mm 10/14 TPI bimetal bandsaw blade is built for cutting steel and other metals. Each one is made to order to the exact 4475mm length, with teeth that are variable pitch, between 10 and 14 teeth per inch.
What 10/14 TPI suits
The 10/14 pitch on this 27mm blade is aimed at smaller solids, tube, angle and general fabrication stock. Follow the three-teeth rule - at least three teeth in contact with the work - which puts the practical lower limit at about 6-8mm of material thickness. Avoid using it on large solid bar, where the fine teeth would fill their gullets and cut slowly; the metals TPI chart shows the alternatives.
Width and length
The 4475mm length matters first: that length is typical of a medium-sized workshop or fabrication bandsaw, and the blade has to match the length your machine specifies exactly. The 27mm width then gives a wide, rigid band built for straight, square cuts through larger stock - it is not intended for curves, and your machine guides and tensioner must be set up for this width.
The HSS tooth edge on this 4475mm bimetal blade stays sharp under the heat of metal cutting, and the spring-steel back flexes around the wheels without cracking early. For mild steel, stainless, tool steels and non-ferrous metals that makes bimetal the longer-lasting option; for wood-only work a carbon blade is a cheaper alternative.
How to check this is the right blade
Three checks confirm the fit: the length must be exactly 4475mm, the width 27mm from tooth tip to back edge, and 10/14 teeth per inch for the work you do. See how are bandsaw blades measured for measuring an old blade, and which TPI do I need if you are unsure about the pitch.
Frequently asked questions
Which machines take a 4475mm blade?
We do not list machine models, as blade lengths vary between versions. Check your machine manual or measure the old blade - if it is 4475mm and the width suits your guides, this blade will fit.
Can I cut wood with this 4475mm x 27mm 10/14 TPI bimetal blade?
It will cut wood, but at 10/14 TPI it is designed around metal, and a bimetal blade is a costlier way to cut timber. For wood-only work a carbon blade in the same 4475mm length is usually the better buy.
What if I need 4475mm in a different TPI or width?
Every blade is made to order, so you can choose another width or TPI at the same 4475mm length on our custom order page.
Need a different size? order your bandsaw blade online.





Reviews
There are no reviews yet.