Description
A made to order Bimetal bandsaw blade
Material: Bimetal
Length: 4435mm
Width: 19mm
TPI: 14/18
Not quite right?
Order a custom size bandsaw blade
Bimetal bandsaw blades represent a significant advancement in cutting technology, providing exceptional performance and durability compared to traditional carbon blades. This blade is fabricated from two distinct materials that are expertly welded together, revolutionising cutting applications across various industries.
About this 4435mm x 19mm 14/18 TPI bimetal blade
Made to order in the UK, this bimetal blade measures 4435mm in length and 19mm in width, with 14/18 teeth per inch. Its tooth pattern is variable pitch, between 14 and 18 teeth per inch, so it cuts smoothly across a range of section sizes.
What 14/18 TPI suits
The 14/18 pitch on this 19mm blade is aimed at thin-wall tube, small angle and light sections. Follow the three-teeth rule - at least three teeth in contact with the work - which puts the practical lower limit at about 4-5mm of material thickness. Avoid using it on thick solids, where the small gullets clog quickly; the metals TPI chart shows the alternatives.
Width and length
The 4435mm length matters first: that length is typical of a medium-sized workshop or fabrication bandsaw, and the blade has to match the length your machine specifies exactly. The 19mm width then gives a good balance of beam strength and flexibility - stiff enough to hold a straight, square cut through metal stock, a common width on workshop metal-cutting bandsaws.
The HSS tooth edge on this 4435mm bimetal blade stays sharp under the heat of metal cutting, and the spring-steel back flexes around the wheels without cracking early. For mild steel, stainless, tool steels and non-ferrous metals that makes bimetal the longer-lasting option; for wood-only work a carbon blade is a cheaper alternative.
How to check this is the right blade
Three checks confirm the fit: the length must be exactly 4435mm, the width 19mm from tooth tip to back edge, and 14/18 teeth per inch for the work you do. See how are bandsaw blades measured for measuring an old blade, and which TPI do I need if you are unsure about the pitch.
Frequently asked questions
What if I need 4435mm in a different TPI or width?
Every blade is made to order, so you can choose another width or TPI at the same 4435mm length on our custom order page.
Does a new 4435mm bimetal blade need breaking in?
Yes. Running the first cuts at reduced feed helps hone the HSS tooth tips and extends blade life. See how bandsaw break-in is done.
Which machines take a 4435mm blade?
We do not list machine models, as blade lengths vary between versions. Check your machine manual or measure the old blade - if it is 4435mm and the width suits your guides, this blade will fit.
Need a different size? order your bandsaw blade online.





Reviews
There are no reviews yet.