Description
Carbon Bandsaw Blade:
Material: Carbon
Length: 2075mm
Width: 3mm (1/8″)
Teeth Per Inch: 14
Not quite right?
Order a custom size Bandsaw Blade
About this 2075mm 3mm 14 TPI carbon blade
This is a carbon bandsaw blade, 2075mm long and 3mm (1/8″) wide, with 14 teeth per inch. It brings very fine curve-cutting ability to a larger bandsaw, so you can do detailed shaping without moving the job to a smaller machine.
A 2075mm blade is longer than those fitted to most compact benchtop saws, and is typical of larger benchtop and smaller floor-standing machines. Check the exact length your saw takes, as even a small difference will stop the blade tensioning correctly.
The 3mm width lets the band follow very small radii, ideal for decorative profiles, patterns, inlay pieces and craft work. With 14 TPI there are about 1.8mm between teeth, so material from around 6mm thick upwards keeps three teeth engaged. It gives a fine, clean cut in plywood, thin hardwood, MDF and plastic sheet.
As a carbon blade it is an economical choice for wood and plastics. Narrow blades need light, steady feed: push too hard on a curve and the band can twist or snap, so let the teeth do the work.
How to check this is the right blade
Check the length printed on your machine plate or on the old blade, and confirm it is 2075mm. Measure the width across the band from the tooth tips to the back edge: it should be 3mm. Then count the teeth over 25mm (one inch) and you should find 14. Our guides how are bandsaw blades measured and which TPI do I need explain each check step by step.
Is a 3mm blade strong enough for a larger bandsaw?
Yes, provided it is tensioned to suit a narrow band and the guides are set close. It is designed for curves rather than heavy straight cuts, so keep a wider blade for resawing.
What pitch should I choose for thicker curved work?
For thicker stock a coarser pitch clears sawdust better. See our TPI guide to match the pitch to your material thickness.
Reviews
There are no reviews yet.