Description
A made to order Bimetal bandsaw blade
Material: Bimetal
Length: 6205mm
Width: 27
TPI: 6/10
Not quite right?
Order a custom size bandsaw blade
About this 6205mm x 27mm 6/10 TPI bimetal blade
If your machine takes a 6205mm blade and you cut mostly metal, this 27mm bimetal blade with 6/10 TPI is a dependable choice. Its teeth are variable pitch, moving between 6 and 10 teeth per inch, so it cuts smoothly across a range of section sizes.
What 6/10 TPI suits
At 6/10 TPI this 6205mm blade is best suited to medium solid bar, angle, channel and tube with a reasonable wall thickness. Keep at least three teeth in the cut at all times: as a rule of thumb that means sections from about 10-12mm upwards. It is not the right choice for thin sheet, where a finer pitch is needed. Our metals TPI chart gives more detail.
Width and length
A 27mm width gives a wide, rigid band built for straight, square cuts through larger stock - it is not intended for curves, and your machine guides and tensioner must be set up for this width. As for length, a loop this long is used on larger workshop and production bandsaws. A bandsaw blade must match the machine's required length exactly, so check your manual or the old blade before ordering this 6205mm size.
The HSS tooth edge on this 6205mm bimetal blade stays sharp under the heat of metal cutting, and the spring-steel back flexes around the wheels without cracking early. For mild steel, stainless, tool steels and non-ferrous metals that makes bimetal the longer-lasting option; for wood-only work a carbon blade is a cheaper alternative.
How to check this is the right blade
Measure the full loop length of your current blade (or check the machine plate or manual) and confirm it is 6205mm. Measure the width from the tooth tips to the back edge - it should be 27mm - and count the teeth over one inch to confirm the 6/10 pitch. Our guides how are bandsaw blades measured and which TPI do I need walk through each step.
Frequently asked questions
Does a new 6205mm bimetal blade need breaking in?
Yes. Running the first cuts at reduced feed helps hone the HSS tooth tips and extends blade life. See how bandsaw break-in is done.
Which machines take a 6205mm blade?
We do not list machine models, as blade lengths vary between versions. Check your machine manual or measure the old blade - if it is 6205mm and the width suits your guides, this blade will fit.
Can I cut wood with this 6205mm x 27mm 6/10 TPI bimetal blade?
It will cut wood, but at 6/10 TPI it is designed around metal, and a bimetal blade is a costlier way to cut timber. For wood-only work a carbon blade in the same 6205mm length is usually the better buy.
Need a different size? order your bandsaw blade online.





Reviews
There are no reviews yet.