Bimetal Bandsaw Blade (L) 3965mm (W) 12.7mm x 6/10TPI

£29.31

Order this exact blade

Description

A made to order Bimetal bandsaw blade

Material: Bimetal

Length: 3965mm

Width: 12.7mm

TPI: 6/10


Not quite right?
Order a custom size Bandsaw Blade

Bimetal bandsaw blades represent a significant advancement in cutting technology, delivering unmatched performance and durability compared to traditional carbon blades. These blades are crafted from two distinct materials that are expertly fused together, redefining cutting applications across various industries.

About this 3965mm x 12.7mm 6/10 TPI bimetal blade

This is a bimetal bandsaw blade, 3965mm long and 12.7mm (1/2″) wide, with a 6/10 variable tooth pitch - a practical blade for cutting metal on larger machines.

Bimetal blades have hard high-speed steel (HSS) teeth on a flexible spring-steel back. The HSS edge stays sharp at the higher temperatures produced when cutting steel, while the back flexes around the wheels without cracking - the reason bimetal is the usual choice for metal cutting.

A 6/10 variable pitch mixes tooth spacings of 6 and 10 TPI along the blade. The changing spacing helps reduce vibration and noise, and it lets one blade cover a useful range of section sizes - medium solid bar and thicker-walled tube, angle and channel - while keeping enough teeth in the cut. Read more in our variable pitch TPI guide.

The 12.7mm (1/2″) width is for straight cutting rather than curves, giving the band the stiffness to cut square. A 3965mm length is used on larger floor-standing metal-cutting bandsaws, so check your machine before ordering.

How to check this is the right blade

Check that your machine’s plate, manual or old blade says 3965mm, measure the band at 12.7mm (1/2″) across from tooth tip to back edge, and count a mix of 6 and 10 teeth in one inch. Our guides to how bandsaw blades are measured and which TPI you need walk you through it.

What does 6/10 TPI mean?

It is a variable pitch: the teeth alternate between 6 and 10 teeth per inch spacing. This smooths the cut and lets the blade handle a wider range of section sizes than a single pitch.

Can this blade cut stainless steel?

Bimetal blades are the usual choice for stainless and other tough steels. Use a steady feed, a suitable band speed and coolant - see our metal cutting with bimetal blades guide.

Do I need to run in a new bimetal blade?

Yes - a short break-in at reduced feed helps the teeth last longer. See how bandsaw break-in is done.

Need a different size? Order your bandsaw blade online made to your exact length, width and TPI.

Additional information

Material

Bimetal

Size

Width

12.7mm

TPI

6/10

Reviews

There are no reviews yet.

Be the first to review “Bimetal Bandsaw Blade (L) 3965mm (W) 12.7mm x 6/10TPI”

Your email address will not be published. Required fields are marked *