Description
A made to order Carbon bandsaw blade
Material: Carbon
Length: 2785mm
Width: 4.8mm (3/16″)
Teeth Per Inch: 14
Not quite right?
Order a custom size Bandsaw Blade
Carbon bandsaw blades are essential tools in various industries due to their precision and efficiency in cutting a multitude of materials such as wood, metal, and plastic. These blades are meticulously crafted from high-carbon steel, noted for its durability, toughness, and edge retention. Their composition predominantly consists of carbon steel, which offers benefits including resistance to wear and heat build-up, ensuring long-lasting sharpness and consistent performance even under challenging conditions.
About this 2785mm 4.8mm 14 TPI carbon blade
This is a carbon bandsaw blade, 2785mm long and 4.8mm (3/16″) wide, with 14 teeth per inch. The fine pitch and narrow band are a popular pairing for shaped work in sheet materials.
The teeth are about 1.8mm apart, so three teeth stay in the cut in material from roughly 5mm thick. That covers most plywood and MDF, thinner hardwoods, and plastic sheet, producing a neat edge on signs, templates, models and decorative pieces.
The 3/16″ width can follow tighter curves than a 1/4″ blade while remaining reasonably stable. This 2785mm length is used on floor-standing bandsaws - check your machine plate or manual for the right size.
A carbon blade is an economical choice for this kind of wood and plastic work.
How to check this is the right blade
Make sure the length is 2785mm, measure 4.8mm from the tooth tips to the back edge, and count 14 teeth along one inch. See how are bandsaw blades measured and which TPI do I need for step-by-step help.
Is 14 TPI too fine for 18mm plywood?
No, 14 TPI works well in 18mm ply and gives a clean edge. Just feed a little slower than you would with a coarser blade.
Should I choose 4.8mm or 6.3mm width?
Choose 4.8mm if you cut tighter curves; choose 6.3mm if most of your cuts are straight or gently curved.
Reviews
There are no reviews yet.